Advertisement
myGuard 7500GL 802.11g Security ADSL Router
Advanced
Configuration options within the Advanced section are for users who wish to take advantage of
the more advanced features of the router. Users who do not understand the features should not
attempt to reconfigure their router, unless advised to do so by support staff.
There are four items within the Advanced section: Static Route, Dynamic DNS, Checking
Email and Device Management.
Static Routing
Click on Routing Table and then choose Create Route add a routing table.
Destination: This is the destination subnet IP address.
Netmask: Subnet mask of the destination IP addresses based on above destination
subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop. This should usually be left at 1.
Chapter 4: Configuration
109
Advertisement
