Billion myGuard 7500GL User Manual page 67

myGuard 7500GL 802.11g Security ADSL Router
2. Click Port Filters. You will then be presented with the pre-defined port filter rules screen (in
this case for the low security level), shown below:
3. Click Delete to delete the existing HTTP rule.
4. Click Add TCP Filter.
Click Add TCP Filter
5. Input the port number (80) and set both Inbound & Outbound to Allow.
6. The new port filter rule for HTTP is shown below:
Chapter 4:Configuration
Input HTTP port number
Select "Allow"
Click Delete
61