Table of Contents
Advertisement
Chapter 3. Operation
automatically displays the name of an installed module. If you want to change this field to
T
YPE
a different type of module, you must set T
M
ENU
A
LARM
T
EST
S
TATE
Once a module is installed, S
to use the module for any data bandwidth.
S
TATUS
O
NLINE
N
R
O
ESPONSE
30
installing modules by simply specifying the module that you want to install
in each slot.
Displays additional status and configuration menus for the selected
module. (To access the submenus for this item, use the arrow keys to
scroll to the
column for the module you want to edit, and press
M
ENU
.) For detailed information on each submenu item, see the section
Enter
Modules/Menu on page 31.
Read security: 5
Displays an alarm condition on the NxT1 HSSI/V.35 Module. Press
this field to activate the menu.
Read security: 5
Displays test name if the NxT1 HSSI/V.35 Module is executing a test. Press
in this field to activate the menu.
Enter
Displays module status as either
is physically installed, it must be marked as online for it to be considered an
available resource. This field allows an installed module to be marked as of-
fline, which may be useful in system troubleshooting. If you choose
the module will not be in alarm condition, but will display
must be set to O
TATE
This read-only field provides status information on the NxT1 HSSI/V.35
Module. The following messages may display:
The module is enabled, and is responding to the system controller's status
polls. This is the normal response of the system.
The module is enabled, but is not responding to the system controller's status
polls. This response indicates either a problem in the system or that the mod-
ule is not installed.
NxT1 HSSI/V.35 Module User Manual
to E
before selecting the other module.
YPE
MPTY
of
O
O
NLINE
FFLINE
in order for the ATLAS 800 Series unit
NLINE
in
Enter
. Even though a module
,
O
FFLINE
.
O
FFLINE
61200771L1-1
Advertisement
Table of Contents
