Environmental Protection - NOMA Quatra 052-9329-2 Instruction Manual

3. Drop-mount and hands-free wiring
TROUBLESHOOTING
Problem
Possible reason
Light does . Wires are not properly connected.
not work
Fan does
. Fan is in reverse (blades are moving in
not seem to
clockwise direction).
move much
air
. Fan is not properly located.
Fan wobbles
. Screws securing fan blade clips to motor
or shakes
are loose.
excessively
. Fan blade and its blade clip are not
fastened securely.
. Canopy and mounting bracket are not
tightened securely.
13

ENVIRONMENTAL PROTECTION

Used electrical appliances are recyclable and should not be discarded in your regular
domestic waste! Please actively support us in conserving resources and protecting the
environment by returning this appliance to a collection centre (if available).
Battery must be recycled or disposed of properly. Dispose of as per the requirements
of your local municipality.
!
Attention: Operation is subject to the following two conditions: (1) This device may not
cause interference. (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Solution
. Ensure wire connector in switch
housing is connected.
. Counter-clockwise (forward) is
recommended in warm weather.
rotation to stop. Use the eraser end
of a pencil to change the forward/
reverse slide switch.
. Place fan in the centre of the room
so there is at least 12" (30 cm)
between the end of the blades and
walls or other obstructions.
. Make sure that screws which attach
fan blade clips to motor are fastened
and tightened.
. Tighten screws of fan blade to blade
clip securely.
. Ensure that canopy and mounting
bracket are tightened securely to
ceiling joist.
Touching
ceiling
11