NOMA Quatra 052-9329-2 Instruction Manual page 7

ASSEMBLY
4. Wiring instructions
4.
WARNING
before wiring.
Remote and Receiver Pairing
Codes are set by pushing the location of the dip switches located on the transmitter and receiver
up or down. It is important that the code used for both the remote and receiver are identical for
the two devices to be able to communicate; otherwise the remote will not be able to control
the fan.
If you plan to install more than one fan then each fan will require the remote and receiver to
use a unique code, or else one remote will be able to control more than one fan.
Installing Receiver Assembly
Once the connection has been made, the receiver inserts into the drop rod hanging bracket.
The canopy comes up to cover the receiver and bracket .
!
!
!
!
ensure
OPEN BATTERY HOUSING
COVER BY PRESSING DOWN
AND SLIDING OUT
7