Safety-Related Information; Correct Use; Warnings; Safety Notes - oventrop X-25 Operating Instructions Manual

Safety-related information

2. Safety-related information

2.1 Correct use

Operating safety is only guaranteed if the prod-
uct is used correctly.
• The controller item no. 1381162 can be
used in the Oventrop fresh water stations
Regumaq X-25.
• The controller item no. 1381160 can be
used in the Oventrop fresh water stations
Regumaq X-45.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
and/or its authorised representatives due to
damage caused by incorrect use will not be
accepted.
Observance of the operating instructions is part
of compliance with correct use.

2.2 Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger
occurs or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the
danger arising from a situation.
WARNING
Indicates a possible danger with
moderate risk. The situation may lead
to death or serious injury if not avoided.
CAUTION
Indicates a possible danger with lower
risk. The situation will lead to minor and
reversible injury if not avoided.
14
Controller X-25/X-45
NOTICE
Indicates a situation that may lead to
damage to property if not avoided.

2.3 Safety notes

We have developed this product in accordance
with current safety requirements.
Please observe the following notes concerning
safe use.
2.3.1 Danger to life due to electric
current
f Ensure that the product can be disconnect-
ed from the power supply at any time.
f Do not put the product into operation if
there are visible signs of damage.
2.3.2 Danger caused by inadequately
qualified personnel
Any work on this product must only be carried
out by qualified tradespeople.
As a result of their professional training and
experience as well as their knowledge of the
relevant legal regulations, qualified trades-
people are able to carry out any work on the
described product professionally.
User
The user must be informed how to operate the
product by qualified tradespeople.
138116080-V01.04.2020