Multidis SFQ
1.
General information
The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
Multidis SFQ heating circuit distributor/collec-
tor for 2 to 12 heating/cooling circuits.
1.2 Extent of supply
Please check the delivery for any damage
caused during transit and for completeness.
Extent of supply:
• Flow distributor
• Return collector
• 2 brackets
• 4 screws
• 4 dowels
• 1 presetting key
• 2 sealing rings for the connection between
the heating circuit distributor/collector and
the ball valve
• Tags for marking the rooms
• Operating instructions
1.3 Contact
Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
1.4 Copyright and protective
rights
These operating instructions are copyright pro-
tected. They are intended for persons involved
with the use of this product exclusively.
140495281-V01.12.2020
1.5 Declaration of conformity
Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EU
Directives concerned.
The declaration of conformity can be obtained
from the manufacturer.
1.6 Symbols used
Important information and further
explanations.
Action required
f
•
Enumeration
1.
Fixed order. Steps 1 to X.
2.
Z
Result of action
2.
Safety-related information
2.1 Normative directives
Observe the constructional and commercial
regulations as well as the regulations relating to
water during installation.
The current standards, rules and guidelines
apply.
• DIN EN 1264
• DIN 18380
• VDI 2035
• DIN EN 16313
2.2 Correct use
Operating safety is only guaranteed if the prod-
uct is used correctly.
The Multidis SFQ heating circuit distributor/
collector serves the central distribution of the
heating/cooling water to the different circuits
of a dwelling. The flow rate is automatically
controlled by the integrated QM valve insert.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
and/or his authorised representatives due to
General information
17