Installation; Preparation Of The Replacement; Replacement Of The Controller - oventrop X-25 Operating Instructions Manual

Installation

5. Installation
WARNING
Danger to life due to electric
current
Danger to life due to contact with live
components.
f Completely disconnect the product
from the power supply.
f Check that no voltage is present.
f Secure the product against switch-
ing back on.
f Only install the product in dry
indoor areas.
CAUTION
Risk of burns due to hot compo-
nents
Any unprotected contact with hot com-
ponents may lead to burns.
f Allow the system to cool down.
f Wear safety gloves.
5.1 Preparation of the
replacement
1. Read the chapter "Installation" completely
before starting work.
2. Completely disconnect the station from the
power supply.
3. Lift off the upper shell.
16
Controller X-25/X-45
Illust. 1: Removal of the upper shell

5.2 Replacement of the controller

1. Carefully remove the controller from the
lower shell.
Illust. 2: Removal of the controller
138116080-V01.04.2020