Malfunction Management; Acknowledge A Malfunction; History Error Summary - Intec PolyGard LGC/LG2-04 User Manual

PolyGard Multi-Point Controller
®
LGC-LG2 – UserManual LGC-LG2 – UserManual
User Manual - LGC/LG2-04
LGC-LG2 – UserManual
3.1

Malfunction management

Malfunction management records the last 15 malfunctions with date and time stamps. In addition, "System Errors"
are recorded in "Error Memory" when the malfunction occurs. This history can be selected and cleared only by the
service technician level password.
A malfunction gets over laid on text message in the starting menu. When the failure happens a relay, which is
defined in the system setup as „Failure relay" is activated. The red LED in the front of the Controller flashes.
During the malfunction of a sensor point (SP) relays that are assigned for sensor are activated. These are defined
in the menu „SP Setup".
3.1.1

Acknowledge a malfunction

Attention:
Acknowledging of a malfunction is only possible after the removal of the cause.
SP 01 < 3mA
Ereased
Malfunction Ereased
3.1.2

History error summary

The code level 2 can open the menu "Hist Error Sum" in the main menu "System Errors".
The last 20 malfunction error messages are listed for the service technician even if they have already been
acknowledged. The deletion of each individual message occurs similar to the acknowledgement of a malfunction.
Polygard® is a registered trademark of MSR
Customer Services (858) 578-7887 & (888) GO INTEC
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | relevantsolutions.com/inteccontrols 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | relevantsolutions.com/inteccontrols
INTEC Controls, 12700 Stowe Dr., Suite 100, Poway, CA 92064
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | USA 131119 | Page 8 of 30 Specifications subject to change without notice. | USA 160104 | Page 8 of 30
Specifications subject to change without notice. | USA 200211 | Page 8 of 30
System Errors
SP 01 < 3mA
05.02 10.38
SP 01 < 3mA
Reset ??
Error still
or
exists
Cause not eliminated
Acknowledgement not possible
Fax (858) 578-4633 & (888) FX INTEC
Select Menu "System Errors"
Example: Failure SP 01 < 3 mA
Malfunction Reset?
Malfunction Reset
PolyGard is a registered trademark of MSR-Electronic GmbH | LGC/LG2-04 Polygard® is a registered trademark of MSR | LGC/LG2-04
®
Specification subject to change without notice.
www.inteccontrols.com
Page 08
LGC/LG2-04
Printed in USA 131119