Progressive Turf Equipment TD 92 Operator's Manual And Parts List page 17

wrap or hook on short chain. Be sure that when decks are brought into
transport position, the safety chain will not bind or pull PTO shield.
The Intermediate shaft is installed with the large bell end onto the main gear
box. The PTO mount bracket is then installed by sliding the PTO end through
the flange bearing, and leaving the mounting bolts loose. Do not forget to
install the PTO mount bracket spacers to level the driveline. Next, install the
PTO spacer, and then the input PTO shaft and locking it in place with the bolt
end of the PTO shaft. See section on "Hitching Mower to Tractor" for
additional information.
17