Solutions For Common Problems; Communication Module; Technical Characteristics - LAVAZZA firma LF 400 MILK Instructions Manual

Problem
The machine does not turn on.
The LEDs flash quickly.
The capsule loading arm does not reach
the locking position.
Water supply does not start.
The machine does not brew coffee.
Button (on/stand-by) lit steady, the
preparation buttons do not respond.
Contact Authorised Lavazza Service Centres for failures not included in the table above
The communication module installed emits radio waves with the following characteristics:
• Frequency band: 2400-2500 MHz
• Max. power: 3 dBm
• Power supply: 220-240 V / 50-60 Hz
• Nominal power: 1250 W
• Water tank capacity: 1200 cc (40,5 oz)
Hereby, LUIGI LAVAZZA S.P.A., declares that this machine complies with the essential requirements and other
relevant provisions of Directive 1999/5/EC, the declaration of conformity of this machine is available on the
website: www.lavazza.com
There are no restrictions for the marketing of the machine in all EU countries.

SOLUTIONS FOR COMMON PROBLEMS

Possible causes
» Machine not connected to the mains. » Check the correct jack input.
» There is a failure.
» The used capsule drawer/drip tray
is full.
» Capsule inserted incorrectly.
» No water in the tank.
» Capsule not inserted.
» Operating temperature not reached.
» Capsule loading arm lifted.
» No water in the tank.
» Drawer positioned incorrectly or open.
» Descaling cycle in progress
or if the proposed solutions do not solve the problem.

COMMUNICATION MODULE

TECHNICAL CHARACTERISTICS

Solutions
» Contact the Authorised Lavazza Service Centre.
» Empty the used capsule drawer/drip tray.
» Lift the capsule loading arm and insert correctly the
capsule.
» Top up with fresh drinking water .
» Insert the capsule.
» Wait until it reaches the proper temperature..
» Lower the capsule loading arm.
» Top up with fresh drinking water.
» Insert drawer.
» Complete the descaling cycle. (See DESCALING
paragraph)
• Weight: 4,6 kg (10.14 lb)
• Materials used for the body: thermoplastic
• Size: Height 32 cm - Width 15,1 cm - Depth 36,8 cm
(Height 12.5 in - Width 5,9 in - Depth 14,4 in)
EN
33