Setting Light Metering; Setting The Date Imprint - BenQ DC C25 User Manual

BenQ DC C25/C35 User's Manual
Setting the EV Bias (Exposure)
Set the EV bias to increase or decrease the camera lens' exposure value. This
allows more or less light to pass through the lens. Adjusting this setting in particularly
bright or dark environments can improve the quality of the photograph. A higher EV
bias value results in a brighter photograph.
1. Press and
Bias menu.
2. Press or the

Setting Light Metering

The DC C25/C35 has three built-in light meter presets that you can use to optimize
photo results in various lighting conditions.
Center Average: The camera adjusts itself based on the average light
measurement over the center region of the viewfinder.
Point: The camera adjusts itself based on a point light measurement at the
center of the viewfinder.
Average: The camera adjusts itself based on the average light measurement
over the entire region of the viewfinder.
1. Press and
light metering menu.
2. Press and
meter setting.

Setting the Date Imprint

You can choose to have the current date imprinted over your photos. This function
can be turned off.
1. Press and
date imprint menu.
2. Press and
date imprint setting.
See page 17 for information on setting the camera's date.
to select the EV
Set button.
SET
to select the
to select the
Date Imprint ON
to select the
to select the
10
3. Press and
EV bias value (from -2.0 to +2.0).
4. Press the Menu
button to confirm your selection
3. Press the Menu
exit the menu or use
move on to the next setting.
Date Imprint OFF
3. Press the Menu
exit the menu or use
confirm move on to the next set-
ting.
to change the
or Set
MENU SET
button to
MENU
and to
button to
MENU
and to