Setting The Metering; Setting The White Balance; Setting The Iso - BenQ DC C640 User Manual

3.7.2 Setting the metering

There are 3 different light metering options available on your camera.
Icon Mode
Center
Multi
Spot

3.7.3 Setting the white balance

Adjust the white balance to match different light sources such as sunlight, incandescent
(tungsten) lighting or, fluorescent lighting.
Icon Mode
Auto
Daylight
Cloudy
Tungsten
Fluor_H
Fluor_L
SH1
(Custom)

3.7.4 Setting the ISO

With the initial settings, the ISO sensitivity is automatically set according to the brightness of
the subject.
• A higher ISO value increases the image noise. To take clean images, use an ISO value as
low as possible.
Description
Light is measured from the entire shooting screen, but gives more
importance to the values near the center.
Selects an exposure based on readings from multiple points in the
subject area
Selects an exposure based on a single reading taken from the center
of your picture.
Description
Automatically corrects white balance. Ideal for general photography.
Adjusts for bright sun conditions, or natural light conditions.
Adjusts for cloudy days or twilight conditions.
Adjusts for normal indoor lighting conditions. Corrects the orange
hue of household light bulbs. Ideal for indoor photos under
tungsten or halogen lighting without a flash.
Adjusts for fluorescent lighting. Corrects the green hue of
fluorescent lighting. Ideal for indoor photos under fluorescent
lighting without a flash.
For more accurate adjustment or when the light source cannot be
specified. When this option is highlighted, press the shutter button
to enter the
[Custom WB]
something white (for example, white paper) as the reference white
color and press the shutter button again. Next, press
the custom setting.
mode. Then, point the camera at
Using the Camera
to confirm
OK
13