Setting The Date And Time - BenQ DC C25 User Manual

BenQ DC C25/C35 User's Manual
1. Enter the setup menu and press
2. Use and
Copy to
SD Card (C35 only)
Note: If an SD card is not inserted, only the "Format Memory" option is available.
\
3. To copy the contents of internal memory, select either the "Copy to SD Card"
icon or the "Copy to Internal Memory"
ton.
4. Use and
your selection. Press the Menu
menu.
5. To format the contents of memory, select the "Format Memory"
press the Set
6. Use and
your selection. Press the Menu
menu
Note: Formatting memory when an SD card is installed erases and formats the
contents of the card only. To format internal memory, the card must be removed.
Resetting File Names
All still images movie clips are given file names that follow the format "IMG_xxxx.yyy"
where "xxxx" is a number from 0001 to 9999 and "yyy" is the file format (JPG, WAV or
AVI). The file number is incremented automatically by the camera. Reset this number
to "0001" (or the next available number) as follows
1. Enter the setup menu and press
2. Press the Set
Set button to confirm your selection or press the Menu
SET
cel and return to the Setup menu.

Setting the Date and Time

Because date and time are stored as metadata with each file recorded by the DC
C25/C35, it is important to set this properly.
1. Enter the setup menu and press
2. Press the Set
3. Use and
ting. Press
4. Press the Set
and return to the Setup menu.
to select one of the following:
Copy to Internal Memory
(C35 only)
to select "Yes" or "No" and press the Set
MENU
button.
SET
to select "Yes" or "No" and press the Set
MENU
button and use
SET
button.
SET
to navigate between year, month, date, hour and minute set-
and to adjust the values for each.
button or the Menu
SET
to select the Copy/Format
icon and press the Set
button to cancel and return to the Setup
button to cancel and return to the Setup
to select the Reset Filename
and to select "Yes" or "No". Press the
to select the Set Date and Time
button to confirm your changes
MENU
17
menu icon.
Format Memory
but-
SET
button to confirm
SET
icon and
button to confirm
SET
menu icon.
button to can-
MENU
menu icon.