Appendix; Warning/Error Messages And Codes - BenQ DC C25 User Manual

BenQ DC C25/C35 User's Manual

Warning/Error Messages and Codes

Message
Card Full
Nandgate Flash Full
Card Lock
Card Error
Nandgate Flash
Error:
System Error
Format Error
File Error
Image Locked
Lens Cover Closed
Error Code
0000~0010
0100~0110
0200~0210
Note: If you cannot turn the digital camera off with power button, please press
Shutter and Set button at the same time to force off.
Cause
There is insufficient card mem-
ory capacity to store an image.
There is insufficient internal
memory capacity to store an
image.
The SD card is locked.
The SD card is corrupted.
The memory is corrupted.
There is a general system
error.
Formatting has failed.
The file is corrupted.
The image can't be deleted
when it is locked.
The lens cover is closed.
System Error
Storage Error
File Error
23
A
PPENDIX
Solution
Delete the stored image(s)
in the memory card or insert
a new memory card. See
page 14 and page 4.
Delete the stored image(s)
in the flash memory. See
page 14.
Switch the card lock to the
unlock position.
Purchase a new SD card.
Format the flash memory.
See page 16.
Turn the camera off and on
and try again.
Turn the camera off and on
and try again, or purchase a
new SD card.
Delete this image (page 14)
and take the picture again.
Unlock the protected image.
See page 14.
Open the lens cover before
taking pictures.
Error Type