Setting The Photo Effect; Adjusting The White Balance - BenQ DC C25 User Manual

BenQ DC C25/C35 User's Manual

Setting the Photo Effect

The DC C25/C35 has four built-in photo effect modes.
Auto: When in automatic mode, the camera will adjust itself automatically to
take the best possible picture under the given conditions.
Portrait: This preset is optimized for taking "head shots" of people. The lens
focuses more on the center of the frame than on the peripheral areas.
Scene: This preset is optimized for taking landscape pictures. The lens focus
is evenly distributed over the area in the frame.
Black and White: Use this photo effect if you want to take black and white
(gray scale) pictures
1. Press and
image quality menu.
2. Press and
olution setting.

Adjusting the White Balance

There are five white balance settings to choose from:
Auto: The camera adjusts itself automatically. It is recommended that you use
this setting except under unusual lighting conditions.
Daylight: Use this setting in bright outdoor settings or under strong lighting.
Cloudy: Use this setting when taking photos in overcast conditions.
Tungsten: This setting should be used in a tungsten light environment.
Fluorescent: This setting should be used in a fluorescent light environment.
1. Press and
image quality menu.
2. Press and
olution setting.
•
Please avoid pointing to bright light source and shooting since it
might cause an abnormal picture because of the technical limita-
tion of the CMOS sensor.
to select the
to select the res-
to select the
to select the res-
Note
9
3. Press the Menu
exit the menu or use
move on to the next setting.
3. Press the Menu
exit the menu or use
move on to the next setting.
button to
MENU
and to
button to
MENU
and to