Before Initial Use - Auriol 303355 Operation And Safety Notes

Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity
marks (+) and (–) on the battery / rechargeable battery and the product.
Clean the contacts on the battery / rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the product
immediately.
˜ Before initial use
Remove the battery insulation strip from between the battery and the contact.
Note: Reception may be considerably reduced by obstructions (e.g. concrete
walls) or sources of interference (e.g. other electrical products). In the event of
reception problems, change the position of the wall clock (e.g. to somewhere near
a window).
Replacing the battery
Turn the wall clock over. Place it on a soft underlay to avoid scratching the
surface and causing damage to the hour hand and minute hand.
Remove the battery and then insert a new battery with the correct polarity.
Make sure to first insert the battery into the battery compartment from the
positive terminal. Then, press down the negative terminal of the battery.
The wall clock is now ready for use.
10 GB/IE/NI