Adding Detailed Information To A Service Template - Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook

Changing the Network preferences
3
Change the following settings if necessary:
1 Enter the telephone number used to access the modem.
If necessary, enter a dial prefix (such as "9") to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a "pause" in the dialing sequence. Each comma equals a
two second pause.
2 If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the Disable call waiting check box to avoid an
interruption during a modem HotSync
Note
Each telephone company assigns a code to disable Call Waiting. Contact your
local telephone company for the code you need.
3 If you want to use a calling card to place the call, select the Use
calling card check box and enter the calling card number.
Tip
There is usually a delay before you enter your calling card number.
Consequently, add at least three commas before your calling card number to
compensate for the delay.
4
Tap OK.

Adding detailed information to a service template

If you are using one of the predefined service templates, you probably only
need to enter your user name and telephone number. If you are creating a new
service template, you may need to provide additional information to your ISP
or dial-in server. Use the Details dialog box to add additional information to
a selected service template.
To select a connection type
1
On the Network Preferences screen, tap the service field.
2
Tap Details.
The Details screen is displayed.
Customizing your Sony CLIÉ™ handheld (Preferences)
®
operation.
Continued on next page
90