Adding/Changing Communication Device Preferences - Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook

Adding/Changing communication device
preferences
You can customize the preference for a communication device to be connected
to your CLIÉ handheld. The applications using the communication device
comply with this preference.
1
Tap the arrow V in the top right-hand corner of the
Preferences screen and select Connection.
2
Tap New.
To change the existing preference, tap the preference you want to change
and Edit.
3
Enter the connection name in Name.
Enter a logical name.
4
Tap the arrow V next to Connect to and select how you
connect your CLIÉ handheld to your computer.
5
Tap the arrow V next to Via and select what you use to
connect your CLIÉ handheld to your computer.
If you select a modem for Connect to
1 Tap the arrow
to use.
The recommend setting is TouchTone.
Do not select Rotary, except when you are sure that the telephone
service being used is not TouchTone.
2 Tap the arrow
speaker at the time of connection.
3 Tap Details.
4 Tap the arrow
transmission between the modem and CLIÉ handheld.
5 Tap the arrow
modem connection.
The recommend setting is Automatic.
6 Enter the modem initialization command in the Init String.
By default, it is set to either AT&FX4 or ATZ. If the modem
initialization command is not specified on the modem, it is not required
to change.
7 Tap OK.
Customizing your Sony CLIÉ™ handheld (Preferences)
V
next to Dialing and select the type of line you want
V
next to Volume and select the volume of the modem
V
next to Speed and select the maximum speed for the
V
next to Flow Ctl and select the flow control of the
Continued on next page
75