Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook page 113

Performing a HotSync
3
Tap the Enter phone # field beneath the modem name.
The Phone Setup dialog box is displayed.
4
Adjust the following settings if necessary:
1 Enter the telephone number used to access the modem connected to
your computer.
2 Enter a dial prefix (such as "9") to access an outside line, and tap the
Dial prefix check box as needed. You can also enter a comma in the
field to introduce a pause in the dialing sequence. Each comma equals
a two second pause.
3 If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the Disable call waiting check box to avoid an
interruption during the modem HotSync
4 If you want to use a calling card to place the call, select the Use
calling card check box and enter the calling card number.
5
Tap OK.
The HotSync screen is displayed again.
Exchanging and updating data using a HotSync
®
(Other HotSync operations)
®
operation via a modem
®
®
operation.
operation
113