Performing A Hotsync ® Operation; Performing A Hotsync ® Operation With The Cradle; (Local Hotsync ® ) - Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook

Performing a HotSync
To perform a HotSync
CLIÉ software must be installed on your computer and the cradle
should be connected to the computer.
b
For details on how to prepare for a HotSync
procedure as described in "Using your CLIÉ handheld with your
computer" in the "Read This First (Operating Instructions)."
Performing a HotSync
(Local HotSync
Performing a HotSync
Local HotSync
1
Place your CLIÉ handheld in the cradle.
2
Press the HotSync
The HotSync
When the HotSync
showing the HotSync
CLIÉ handheld.
Exchanging and updating data using a HotSync
®
operation, the Palm™ Desktop for
®
operation with the cradle
®
)
®
operation with the cradle is called a
®
.
®
operation starts.
®
operation is complete, a message
®
completion is displayed on your
®
operation
®
operation, follow the
button on the cradle.
(Location of the HotSync
button may vary
depending on your
model.)
Continued on next page
®
operation
60