Performing A Hotsync Operation Via Lan (Lansync); Performing A Hotsync ® Operation Via Lan (Lansync) - Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook

Performing a HotSync
(LANSync)
To operate LANSync, you must have network manager skills. Consult a
network manager prior to setting LANSync.
You can perform a HotSync
another computer connected to your CLIÉ handheld.
Prior to performing a LANSync operation
Check the following items.
• The Palm™ Desktop for CLIÉ software is installed in both computers
connected by the LAN.
• Your CLIÉ handheld is placed on the cradle correctly and the cradle is
connected to the computer properly.
Preparing your computer
1
Click the HotSync
right-hand corner of the taskbar) and select Network from
the shortcut menu.
2
Click the HotSync
and select Setup from the shortcut menu.
The Setup screen is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
5
Click OK.
Exchanging and updating data using a HotSync
®
(Other HotSync operations)
®
operation via LAN
®
operation via LAN between your computer and
LANSync via LAN
LAN
icon in the Windows task tray (bottom
icon in the Windows task tray again
®
Your computer
Continued on next page
operation
121