Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0, #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Base cover
Base cover
M.2 2230 solid-state drive
M.2 2280 solid-state drive
Battery
Rear I/O-cover
Wireless-card bracket
Power-adapter port-bracket
Screw type
Quantity
M2.5x9
2
M2.5x5, captive
4
M2.5x5
2
M2x3
1 per solid-state drive
M2x3
1 per solid-state drive
M2x4
6
M2.5x5
2
M2x3
1
M2x3
1
Screw image
Removing and installing components
2
9
Hide quick links:
Advertisement
Table of Contents
