Steps
1. Connect the battery cable to the system board.
2. Place and slide the base cover into place on the palm-rest and keyboard assembly.
3. Tighten the four captive screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
4. Replace the two screws (M2.5x9) that secure the base cover to the palm-rest and keyboard assembly.
5. Replace the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in
Memory module
Removing the memory
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
17