Steps
1. Place the headset port into the slot on the palm-rest and keyboard assembly.
2. Adhere the headset-port cable to the palm-rest and keyboard assembly.
3. Connect the headset-port cable to the system board.
4. Move the I/O-board cable back into place and connect the I/O-board cable to the system board.
Next steps
1. Install the
rear-I/O
cover.
2. Install the
base
cover.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
34
Removing and installing components
After working inside your
Before working inside your
computer.
computer.