Headset Port - Dell Alienware x17 R1 Service Manual

Steps
1. Connect the power-adapter port cable to the system board.
2. Slide the power-adapter port at an angle into the slot on the palm-rest and keyboard assembly and adhere the power-
adapter port cable to the system board.
3. Adhere the tapes that secure the power-adapter port cable to the system board.
4. Place the power-adapter port bracket on the palm-rest and keyboard assembly.
5. Align the screw holes on the power-adapter port bracket to the screw holes on the palm-rest and keyboard assembly.
6. Replace the two screws (M2.5x5) that secure the power-adapter port bracket to the palm-rest and keyboard assembly.
7. Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the rear-I/O cover.
2. Install the base cover.
3. Follow the procedure in

Headset port

Removing the headset port
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear-I/O
About this task
The following image(s) indicate the location of the headset port and provides a visual representation of the removal procedure.
32 Removing and installing components
After working inside your
Before working inside your
cover.
computer.
computer.