Steps
1. Place the I/O board on the palm-rest and keyboard assembly and align the screw holes on the I/O board to the screw holes
on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
heat
pipe.
3. Install the
left
fan.
4. Install the
right
fan.
5. Install the
headset
port.
6. Install the
power-adapter
7. Install the
rear-I/O
cover.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
Keyboard bracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the memory.
4. Remove the battery.
5. Remove the
rear-I/O
6. Remove the
power-adapter
7. Remove the
headset
port.
8. Remove the speakers.
64
Removing and installing components
port.
After working inside your
Before working inside your
cover.
port.
computer.
computer.