1. Replace any blade which, while rotating, has a back and
forth movement over average. Generally, a bad welding
is in cause and blades break quickly.
2. In the event of a blade break, stop the machine imme-
diately et move away to avoid any part projection. Wait
until complete wheels stop before opening the access
doors.
ProDUCT sAFeTY
3. While using, do not bring your fingers any closer than
4. Get rid of the waste parts as you go, rather than letting
Page 6
2" to the blade. Use a push stick or pull the piece from
behind the blade.
them fall on the floor and risk to tip over them.