Connect Your Camera - Cisco Webex Desk User Manual

Connect Your Camera

• The privacy shutter on your camera turns the video stream on and off. Slide the shutter right or left to
• When using your camera with an app on your computer, close the other applications that may use the
• The camera has an IR sensor for Windows Hello. Don't block the sensor.
• Gently wipe your camera with a dry and soft cloth on the surface and the front panel. Rough materials
Connect Your Camera
Your camera gets power from the computer through the USB cable. It's shipped with a USB-A and a USB-C
cable. Use the cable that fits the USB port on your computer.
You can mount your camera on your computer, on a display screen, on a desk stand or on a tripod, and
participate in a video call or meeting.
Procedure
Step 1
Open the camera clip.
Step 2 Adjust the camera.
a) Place your camera on the top edge of your computer display and close the clip until the camera is steady.
Refer to the bottom arrow of the previous figure.
b) Lift the back end of the camera to adjust the angle. Refer to the top arrow of the previous figure.
Step 3
Connect your camera to your computer with one of the provided USB cables.
Cisco Webex Desk Camera User Guide
6
turn the video stream on and off, instead of disconnecting and reconnecting your camera.
camera at the same time. Your camera supports one application on Windows, and more than one
application on Mac OS at a time.
may scratch the front panel and affect image clarity.
Set Up Your Camera