Cisco Webex Desk User Manual page 24

Configure the Video Image Settings
Parameter
Field of view
Brightness
The following table describes the video image parameters available on the Advanced tab.
Table 5: Video Image Settings on the Advanced Tab
Parameter
Auto focus
Auto white balance
Contrast
Sharpness
Cisco Webex Desk Camera User Guide
18
Description
The field of view determines the width of the view that you can see from the
camera. The higher degree you set, the wider the image.
Default: 81
Options: 65, 70, 75, 81
Adjust the brightness of the camera image to suit the available light.
Drag the slider left to decrease the brightness or right to increase the
brightness.
The camera uses facial detection when it sets the correct auto exposure. But
if your place is brightly backlit or front lit, then it may under or overexpose
your image. Adjust the Brightness setting if you are silhouetted or overexposed
in a video call.
Description
Enables or disables automatic focus.
In autofocus mode, the camera adjusts the lens to focus on the subject within
the camera view.
If the autofocus mode is turned off, you can manually adjust the focus. Drag
the slider left to make the lense focus closer, and right to focus further.
Default: On
Enables or disables automatic white balance.
When auto mode is on, the camera examines the lighting condition and
determines the colors to render the image.
When the auto mode is off, you can use the slider to adjust the white balance
manually and get your intended image colors.
Default: On
If necessary, adjust the contrast value to improve the image clarity.
Drag the slider left to decrease image contrast or right to increase contrast.
Adjusts the sharpness level. A proper sharpness level renders the image details
clearly. Drag the slider left to smooth the image or right to sharpen the image.
Use Your Camera with the Camera App