Table of Contents
Advertisement
Drive to Motor Connection Panel Mount
EMC-Compliant Setup – 230 Vac, 460/480 Vac, 600 Vac
Notes: 1. Power cable: L1, L2, L3 and U, V, W.
2. Control and signal lines: 1 to 36, fieldbus connection Large-area connection of all metallic control panel
components. Mounting surfaces of frequency inverter and cable shielding must be free from paint. Connect the
cable shielding in the output of the frequency inverter with a large surface area contact to the ground potential
(PES). Large-area cable shield contacts with motor. Large-area earth connection of all metallic parts.
27
Advertisement
Table of Contents
