Emerson EVH Series Installation Manual page 12

Variable frequency drive

Table of Contents

FR6 Mounting Instructions

Step 1: Remove the carton from the drive

Step 2: Remove the four screws (used to fix the drive to the pallet) with an M8 or 3/8-inch wrench.

Step 3: Use a hook to lift the drive.

Step 4: Attach the drive to the mounting plate with four M8x20 or 3/8-inch screws and four M8 or 3/8-inch nuts with an

M8 or 2/8-inch wrench. The opening dimensions on the mounting plate should follow required dimensions (refer to the

drive mounting template printed on the outside carton).

Table of Contents