Emerson EVH Series Installation Manual page 9

FR1 Mounting Instructions
Step 1: Lift the drive out from the carton. Remove the
packaging.
Step 2: Attach the drive to the mounting plate with
four M5x15 or 3/16 inch screws and four M5 or 3/16
inch nuts. The opening dimensions on the mounting
plate should follow required dimensions (refer to the
drive mounting template printed on the
outside carton).
FR2 Mounting Instructions
Step 1: Lift the drive out from the carton. Remove the
packaging.
Step 2: Attach the drive to the mounting plate with four
M5x15 or 3/16 inch screws and four M5 or 3/16 inch
nuts. The opening dimensions on the mounting plate
should follow required dimensions (refer to the drive
mounting template printed on the outside carton).
9