Adjusting "Finisher" And "Fold - Ricoh Pro C9200 Series Tips

RICOH Iro C9200 Series Tips on High Quality Irint

Adjusting "Finisher" and "Fold"

Finisher and fold unit functions can be adjusted in [Adjustment Settings for Operators]. For
details, see [6. Adjustment Settings for Operators] in Operator's
Adjusting finisher
To adjust finisher functions, select [06 Finishing: Finisher] on the [Adjustment Settings for Op-
erators] screen. On the [06 Finishing: Finisher] screen, it is possible to adjust positions of sta-
ples and punches for 12 types of functions including the below.
Adjusting fold
To adjust fold unit functions, select [07 Finishing: Fold] on the [Adjustment Settings for Opera-
tors] screen. On the [07 Finishing: Fold] screen, it is possible to adjust fold positions of 17 types
including the below.
0601: Staple Position:
Across Feed 1
0602: Staple Position:
Across Feed 2
0603: Staple Position:
With Feed
0604: Paper Align-
ment for Stapling:
Across Feed
0619 Folding Position
for Booklet
0701 Z-fold Position 1 Adjust the fold position of the end seg-
0702 Z-fold Position 2 Adjust the overall fold size (L) of the Z-
33
April.15, 2019
Guide.
Adjust the vertical position of the staple
(applied at an edge).
Adjust the vertical position of the staples
(dual).
Adjust the horizontal position of the sta-
ples.
Adjust the width of the Staple Jogger (A
guide for aligning output sheets) when
using the staple function.
Adjust the horizontal position of the fold-
ing.
ment (S) when using the fold unit.