TVS Apache RTR 180 Hyper Edge Owner's Manual page 52

MAINTENANCE
F R O N T W H E E L R E M O V A L A N D
REASSEMBLY
1. Remove the axle nut (1) along with a washer.
2. Pull out the axle (2) along with a washer and
remove a spacer from the right side of the
wheel.
1
Warning
Ensure proper seating of disc in the caliper assembly
while reassembling.
3. Place a support below the frame to prevent
4. Carefully dislocate the disc from the caliper
5. Reverse the procedure for reassembling.
R E A R W H E E L R E M O V A L A N D
REASSEMBLY
1. Remove the axle nut (1) and along with the
2
-46-
vehicle from falling and lift the vehicle up.
assembly. Dislocate the hub drive from the
wheel and slide the wheel out.
Ensure proper seating of hub drive in the wheel
assembly and front fork during reassembly.
washer.
1
2