Advertisement
KNOW YOUR APACHE RTR 180
7. Odometer / Trip meter A & B / High
speed indicator / Shortest time indicator
Odometer registers and displays the total distance
covered by the vehicle in kilometers. The digit after
the dot mark denotes one tenth of a kilometer. Set
the display in 'ODO' mode to know reading.
Trip meter registers and displays the partial
distance covered in kilometers. The digit after the
dot mark denotes one tenth of a kilometer. Option
is provided to measure two different distances
('TRIP A' and 'TRIP B'). You can reset it whenever
required. Set the display in 'TRIP A' or 'TRIP B'
mode to know the trip distance.
High speed indicator records the maximum speed
(top speed) achieved by the rider so far. You can
reset and record new speed if required.
Set the meter in 'HI Spd' mode to know the
maximum speed achieved by any user so far.
Shortest time indicator records the minimum time
taken so far to reach the 60 kmph speed. You can
reset and record new time if required. Set the
meter in 'St' mode to know the time consumed by
a rider to reach the specific speed from starting.
8. Mode and Set switch buttons
To change the mode between 'ODO', 'TRIP A',
'TRIP B', 'HI Spd', 'St' and to set the clock timing,
the mode and set switches are provided.
Refer page no. 15 for setting / resetting the
odometer, trip meter, high speed indicator and
shortest time indicator.
Note
Maximum speed recorded so far will be displayed
whenever the ignition switch is turned 'ON' and the
meter is in 'HI Spd' mode. If the high speed is reset,
the speed value will be shown as '0'.
Similarly, minimum time taken recorded so far to
reach 60 kmph speed will be displayed when the
ignition is turned 'ON' and the meter is in 'St' mode.
The value will be displayed as 9.9 seconds if the 'St'
mode is reset.
In 'St' mode, fuel level indication bars of fuel gauge
disappears. These bars appears only after changing
the mode from 'St' to another.
-14-
Hide quick links:
Advertisement
