Advertisement
Quick Links
HOTLINE
Fluid Warmer (HL-90)
®
HOTLINE
Fluid Warming Sets (L-70)
®
Step-by-Step Guide
IMPORTANT: Please refer to the Operator's Manual supplied
with the product for detailed instructions, contraindications,
warnings and cautions and the appropriate IFU for specific
information on using disposable sets.
•
1
•
Plug the Twin-Tube Connector on the HOTLINE
warming set into the socket
•
3
•
Connect the IV fluid and the intravenous administration set to
the HOTLINE
fluid warming set
®
•
Fully prime the intravenous administration set and the
HOTLINE
fluid warming set prior to connecting to the patient
®
Warning: Prime the recirculating solution path before
connecting to the intravenous extension set, to confirm there
is no breach between the recirculating solution path and the
intravenous path.
•
2
HL-90
fluid
•
Turn ON the power switch
®
•
Inspect the patient end of the HOTLINE
leaks to confirm the integrity of the intravenous pathways
•
4
•
After use, turn OFF the power switch
•
Remove the HOTLINE
plug into the socket
L-70
fluid warming set for
®
fluid warming set and insert the reflux
®
Advertisement
Related Manuals for Smiths Medical level 1 HOTLINE Fluid Warmer
Summary of Contents for Smiths Medical level 1 HOTLINE Fluid Warmer
- Page 1 HOTLINE Fluid Warmer (HL-90) ® HOTLINE Fluid Warming Sets (L-70) ® Step-by-Step Guide IMPORTANT: Please refer to the Operator’s Manual supplied Warning: Prime the recirculating solution path before with the product for detailed instructions, contraindications, connecting to the intravenous extension set, to confirm there warnings and cautions and the appropriate IFU for specific is no breach between the recirculating solution path and the information on using disposable sets.
- Page 2 Smiths Medical is part of the global technology business Smiths Group plc. Please see the Instructions for Use/Operator’s Manual for a complete listing of the indications, contraindications, warnings and precautions. HOTLINE, Level 1 and the Smiths Medical design mark are trademarks of Smiths Medical. The symbol ® indicates the trademark is registered in the U.S. Patent and Trademark Office and certain other countries.
Need help?
Do you have a question about the level 1 HOTLINE Fluid Warmer and is the answer not in the manual?
Questions and answers
Do you drain the water after each use? What is the expected time frame?
The Smiths Medical HOTLINE® Fluid Warmer does not require draining of water after each use. The recirculating solution and disinfection of the reservoir are performed based on the type of solution used, with maintenance required every 30 days or 12 months. Draining is part of the maintenance process, not a daily requirement.
This answer is automatically generated