Pullback Configuration Setup Safety Limits - L-Acoustics KARAi Rigging Manual

®
KARA
i
MODULAR WST
RIGGING PROCEDURES
VERSION 1.1
9.1.3

Pullback configuration setup safety limits

An M-BUMPi bar can be fixed to the bottom enclosure of a KARAi array to obtain a pullback configuration (array site
angle settable down to -90°) within the mechanical safety limits given in Table 6.
Always refer to Table 6 before setting an array in pullback configuration.
WARNING
Number of KARAi enclosures in the array
Number of SB18i enclosures in the array
Maximum array negative site angle
-90°
Figure 35: Pullback configuration example with site angle -90°
KARA i _RM_EN_1-1
® SYSTEM
Table 6: Mechanical safety limits in pullback configuration
w w w . l - a c o u s t i c s . c o m
12 12 9
0 4 3
-90° -10° -60°
6 3
2 1
-90° -90°
44