Array Site Angle Setting; Safety Pin Removal And Insertion - L-Acoustics KARAi Rigging Manual

®
KARA
i
MODULAR WST
RIGGING PROCEDURES
VERSION 1.1
9.2.2

Array site angle setting

The site angle of the stacked KARAi array will be determined by the angle of the bottom enclosure in the range from
-10° to 0°. Table 7 gives all possible site angle settings:
KARAi angle arm hole
-10°
9.3

Safety pin removal and insertion

The safety pins provided with the shackles have an integrated locking system. Figure 39 presents the removal and
insertion procedures.
Always put the safety pin in locked position before use.
WARNING
Unlock
KARA i _RM_EN_1-1
® SYSTEM
Table 7: Possible site angles for a KARAi stacked array
0°
1°
2°
3°
4°
5°
7.5°
10°
0°
Figure 38: Bottom KARAi angle setting
Remove / Insert
Figure 39: Safety pin removal and insertion procedures
w w w . l - a c o u s t i c s . c o m
Resulting site angle (Figure 38)
-10°
-9°
-8°
-7°
-6°
-5°
-2.5°
0°
0°
10°
Lock
46