Stacked Array Options And Site Angle Setting; Stacking Platform Configuration - L-Acoustics KARAi Rigging Manual

9.2

Stacked array options and site angle setting

9.2.1

Stacking platform configuration

For a stacked array, the M-BUMPi structure is used as a horizontal platform. It can be installed in front or rear
extension configuration as shown in Figure 36 and Figure 37 (refer to [9.2.2] to obtain the array site angle
corresponding to the chosen angle value).
The configurations shown in Figure 36 and Figure 37 are purely indicative.
Refer to [6.3.1] for setup safety limits.
WARNING
0° site angle
Horizontal line
Bar under KARAi for
acoustic purposes
Full view
Horizontal line
Negative site angle
Front extension
Side view
KARA i _RM_EN_1-1
Full view
Rear extension
Side view
Figure 36: Rear extension configuration
KARAi
rigging
holes
Figure 37: Front extension configuration
w w w . l - a c o u s t i c s . c o m
Positions of the KARAi
rigging points
M-BUMPi structure
M-BUMPi structure
45