Adding A Pullback With A15-Bump/A15-Rigbar - L-Acoustics A15 Series Owner's Manual

Rigging procedures

Adding a pullback with A15-BUMP/A15-RIGBAR

Type of deployment
Rigging accessory
Min number of operators
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Assembly
Procedure
1. Prepare a vertical array as described in
2. Raise the array until the bottom enclosure is accessible.
3. Secure A15-BUMP or A15-RIGBAR under the array.
Connect A15-BUMP to the bottom enclosure on both
sides.
56
own array with pullback
A15-BUMP/A15-RIGBAR
1 x Ø12 mm shackle WLL 1 t (provided)
2
Flying a vertical array with A15-BUMP/A15-RIGBAR
A15-BUMP
SHLAK!
A15-RIGBAR
Connect A15-RIGBAR to the bottom enclosure on both
sides.
SHLAK!
(p.49).
A15 owner's manual (EN) version 1.2