The Helmet; Standard 60; Ece-Approval; Anatomy Of The Helmet - SCHUBERTH J1 Manual

D. THE HELMET
1. STANDARD
The J1 conforms to the ECE R 22.05 J standard. This test standard
guarantees conformity to defined safety standards in respect of impact
absorption, penetration resistance, lateral rigidity, retention system
and field of vision. The approval guarantees that you have approval for
all the countries of the European Union and all countries that recognise
the ECE standard. It also guarantees conformity in the event of an
insurance claim.
Please note that this J1 with ECE approval is specifically oriented to
the ECE standard and is therefore not approved for the USA or Canada
in particular. It is only legal to use it in countries where the ECE
standard is valid.
Note:
The only SCHUBERTH helmets legal for use in the USA or Canada
are those with appropriate approval and technical specification.
Further information and sales outlets for these helmets can be
found on the Internet at:
www.schuberth.com/us/home
www.schuberth.com/canada
2. ECE APPPROVAL
ECE-test standard
Approval number
60

3. ANATOMY OF THE HELMET

4. OUTER SHELL

The outer shell of the J1 combines an aerodynamically optimal shape
with thorough protection. It consists of S.T.R.O.N.G. fibre – a special
glass fibre-reinforced, duroplastic matrix developed by SCHUBERTH,
which gives the helmet the high level of strength needed for your
protection.
Approval authorithy

5. INNER SHELL

Serial number
For optimised impact absorption properties, the inner shell of the
helmet consists of several components. This complex segmenting
achieves better absorption and distribution of impact forces and gives
you a high level of protection. The large side sections ensure the
helmet provides optimum fit and the greatest comfort.
Visor
Inner shell
Reflective eyes
Sun visor
Interior lining
Head outlet vent
(in the neck pad)
Chin guard hoop
Chinstrap with
push-button fastener
Caution:
The safety helmet is designed to absorb the effect of only one
blow – or impact. The helmet must be replaced after a fall,
accident or any other action of force.
Head inlet vent
Head outlet vent
Operating slide for
sun visor
Visor mechanism
Outer shell
Chin hoop lock operation
Retention system
(with Anti-Roll-Off System)
61