The Helmet; Standard; Ece Approval / Dot-Label - SCHUBERTH SR1 Owner's Manual

D. the helmet
1. CONFORMANCE TO STANDARDS
The helmet conforms to the DOT 218 Standard and the ECE R 22.05
standard. These test standards guarantee conformity to defined
safety standards in respect of impact absorption, penetration
resistance, lateral rigidity, retention system and field of vision.
The approval guarantees that you have approval for the USA
and all the countries of the European Union as well as countries
which recognize the ECE R 22.05 or DOT 218 standard. It is only
legal to use it in countries where these standards are valid.
2. ECE APPROVAL and DOT-LABEL
(fixed to the comfort padding of the retention system)
ECE test standard
Certification number
DOT-LABEL (fixed to the rear side of the helmet)
051234/P-1234
Certifying authority
Serial number
11