Standard G; Ece Approval; Anatomy The Helmet; Outer Shell - SCHUBERTH C3 PRO Manual

C. THE HELMET
1. STANDARD
The C3 PRO conforms to the ECE-R 22.05 standard. This testing norm
guarantees conformity to defined safety standards in respect of impact
absorption, visor, retention system and field of vision. The certification
applies to all the countries of the European Union and all countries that
recognise the ECE standard. It also guarantees conformity with all insurance
requirements that are important in the event of a claim.
Please note that this C3 PRO with ECE approval is not certified for the USA,
Canada or any other EU countries. It is only permitted for use in countries
where the ECE standard is valid.
Note:
The only SCHUBERTH helmets that it is legal to use in the USA,
Canada or other non-EU countries are those with the appropriate
approval and technical specifications.
Further information and details of sales outlets for these helmets
can be found on the internet.
2. ECE-APPROVAL
ECE test standard
Certification number
051234/P-1234
Certifying authority
Serial number
3. ANATOMY OF THE HELMET
Integrated antennas
Face shield
Reflective panels
Sun visor
Inner lining
Head ventilation
Face shield/
chin ventilation
Chin bar release

4. OUTER SHELL

The outer shell of the C3 PRO helmet combines an aerodynamically
optimal shape with consistent protection. It consists of a special glass-fibre
reinforced duroplastic matrix developed by SCHUBERTH, which gives the
helmet the high level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the effects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.

5. INNER SHELL

For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding
of the main body provides better absorption and dissipation of impact forces
and gives you the highest level of safety. The large side panels ensure the
helmet sits optimally and comfortably.
Head ventilation
Inner shell EN
Anti-fog lens
Visor mechanics
Outer shell
Retention system
(with anti-roll-off system)
Operating slide for
sun visor
Chinstrap buckle