Chapter 2: Setting Up The Instrument - Molecular Devices SpectraMax ABS Installation Manual

Chapter 2: Setting Up the Instrument

Before you unpack and set up the instrument, prepare a dry, flat work area that has
sufficient space for the instrument, host computer, and required cables. To provide access
for disconnecting power from the instrument, maintain a 20 cm to 30 cm (7.9 in. to 11.8 in.)
gap between the rear of the instrument and the wall. To ensure sufficient ventilation, do not
block the ventilation grids on the front and rear of the instrument.
The package contains the instrument and accessories to set up the instrument:
SoftMax Pro Software, product key, and installation guide
Instrument Installation Guide
USB computer connection cable
AC power adapter
For a complete list of the package contents, see the enclosed packing list.
The SoftMax Pro Software installation places a copy of the available microplate reader user
guides (.pdf) in the following location on the computer:
C:\ProgramData\Molecular Devices\User Guides
The most recent version of the microplate reader user guides and the SoftMax Pro Data
Acquisition and Analysis Software User Guide are available on the Molecular Devices
Knowledge Base:
In the software, select the Home tab, click Contact Us, and then select Knowledge Base.
Or go to www.moleculardevices.com/service-support.
Install the SoftMax Pro Software on the computer that operates the microplate reader. See
the SoftMax Pro Data Acquisition and Analysis Software Installation Guide.
The packaging is designed to protect the instrument during shipment. Tape is placed on the
cuvette door to protect the instrument from damage during shipment.
CAUTION! Do not touch or loosen screws or parts other than those specifically
designated in the instructions. Doing so could cause misalignment and possibly void
the warranty.
Note: Retain the shipping box and all packing materials for future transport needs.
CAUTION! When transporting the instrument, warranty claims are void if improper
packaging results in damage during transport.
CAUTION! Before unpacking the instrument, check the box for damage that occurred
during transportation. If any damage is noted, inform the supplier immediately and
keep the damaged packaging. Unless instructed otherwise by the supplier, do not
continue to unpack the instrument.
5065391 A 5