System Programming - FASTRON. VISION VC-220 Operating Manual

System Programming

Enter System
Programming Mode
CODE 1712
Auto Pre-Heat
Global Timer
Exit System
Programming Mode
NOTE: You can only exit system
programming when a key or
keys have been completely
programmed and the display
shows SYSTEM PROGRAM.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
(FASTRON.) VC-220
Press and
hold for 3
seconds.
Set a new time using the num-
bered keys (see example).
The Auto Pre-heat Global Timer can be enabled or disabled. When it is enabled, an
internal clock keeps track of how long the grill control has been idle. If the auto pre-
heat option is enabled for a given recipe, and the recipe is selected in idle mode by
pressing the appropriate product key after power up, the controller software will al-
ways perform a pre-heat cycle in cook/timer mode for the time specified by the first
stage of the recipe. Once the recipe is completed and the controller software returns
to the idle mode, a programmable auto pre-heat global timer will be counting down. If
a recipe button is pushed during this time the pre-heat cycle (stage 1 timer) will be
skipped and the recipe will continue with stage 2 instead. However, if no recipe is
started within 20 minutes, the "Auto pre-heat" function will become active. Once the
"Auto Pre-heat" function becomes active, any recipe that is started with its auto pre-
heat option enabled will perform a pre-heat cycle for a time specified by its stage 1
time.
The following are all conditions that will activate or reset the "Auto Pre-heat" global
timer:
Auto Pre-heat global timer will start counting down after a recipe is completed or can-
celed during a "Hold Mode" stage (Hold Mode flag = enabled). The timer will not start
counting down if the recipe is canceled during a cook stage (Hold Mode flag =
disabled).
Auto Pre-heat global timer will be reset after all consecutive cook stages are com-
pleted. If there is only one cook stage for a given recipe, then the Auto Pre-heat global
timer will be reset after the one cook stage is done.
Press PROG
twice to exit.
www.fastinc.com
Enter code
1 7 1 2
To confirm
your choice,
press ENTER.
1-800-243-9271
229-51300 E
9
© 2005-2010 FAST