This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Full digital single phase scr power controller (37 pages)
Summary of Contents for FASTRON. VC-210
Page 1
OPERATING GUIDE ® (FASTRON.) VC-210 Controller ® Save the instructions 24/7 Toll-Free Technical Support 1-800-243-9271 for future reference. www.KitchenBrains.com (from the U.S., Canada and the Caribbean) This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 2
Operating the (FASTRON.) ® VC-210 The (FASTRON.)® VC-210 process controller is used to control many different appliances. Each controller can time up to 20 products, store messages, alarm names, cooking and filtering parameters, and has shortening management capabilities. Kitchen Brains is not liable for any use of product not in accordance with its installation and operating instructions.
Page 3
Operating the (FASTRON.) ® VC-210 RECIPE PROGRAMMING (1724) KEY PRESS DISPLAY ACTION Enter Program Mode • To enter programming mode, press and hold the “P” key for 3 seconds. • Scroll down to “Programming.” • Press the “P” key to lock in entry.
Page 4
Operating the (FASTRON.) ® VC-210 Choose a Product Name PRODUCT NAME • Press the UP or DOWN arrow keys to scroll through product names, OR start spelling the desired product name by using the top row of lettered product keys.
Page 5
Operating the (FASTRON.) ® VC-210 Set Pressure Solenoid STAGE 1 PRESSURE • Press the LEFT or RIGHT arrow Position (OPEN, CLOSED) keys to select whether the pressure solenoid should be opened or closed. This message will appear only if the appliance is a pressure fryer.
Page 6
Operating the (FASTRON.) ® VC-210 Setting Alarm 1 Tone ALARM 1 TONE • Press the LEFT or RIGHT arrow keys to select Alarm Tone. SHORT, MEDIUM, LONG, DOUBLE, LONG/SHORT, NONE • Press the “P” key to advance to next stage or parameter.