FASTRON. VISION VC-220 Operating Manual page 8

Product Programming
Done Mode
Beep Frequency
Additional Stages
NOTE: If no additional stages
are desired, set the time for
the next stage to zero then
press ENTER to continue to
Exit Program Mode. (Up to 11
stages can be programmed.)
Exit Product
Programming Mode
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
8
(FASTRON.) VC-220
Use the Up/Down To confirm
arrows to choose your choice,
Automatic or press ENTER.
Manual.
Use the Up/Down To confirm
arrows to scroll your choice,
through Frequen- press ENTER.
cies. Choices are:
NONE (F0); 1
through 6 (F1-F6).
Set a new stage time using the
numbered keys.
www.fastinc.com 1-800-243-9271
To confirm
your choice,
press ENTER.
229-51300 E © 2005-2010 FAST