Full digital single phase scr power controller (37 pages)
Summary of Contents for FASTRON. VC-210
Page 1
® Process Controller – (FASTRON.) VC-210 (FASTRON.) VC-210 Controller The (FASTRON.) VC-210 process controller is used to control many different appliances. Each controller can time up to 20 products, store messages, alarm names, cooking and filtering parameters, and has shortening management capabilities.
Page 2
Process Controllers Installing the (FASTRON.) VC-210 Controller REMOVE EXISTING (FASTRON.) Unplug fryer Remove the two (2) screws from the bezel securing the (FASTRON.) controller in the header cavity. Remove the bezel. Remove the controller by disconnecting the 9-pin and 2-pin connectors. (Several pressure and split vat fryers will have additional connectors that will have to be removed.)
Page 3
Process Controllers Parts Description – (FASTRON.) VC-210 Controller Part Function • Used for recipe review during idle. 1. SCAN key • Used to review time remaining during multiple cooks (press & hold) • Depressing this key for three seconds will force a filter 2.
Page 4
Process Controllers Glossary of Terms and Features Polish: The circulation of the shortening through the filter for a period of time, as opposed to filtering which passes the shortening through the filter only once. Polish Later: The polish later command is active at all times UNLESS the delay time is programmed to ZERO.
Page 5
Process Controllers Using the (FASTRON.) VC-210 Controller: Operational Test Procedure Plug fryer into electrical source NOTE: This scrolling can be bypassed by pressing SCAN. The controller will scroll through the following: Appliance Type Software # Download # Current Date Time of Day SCK Address “COOL”...
Page 6
Process Controllers Operating the (FASTRON.) VC-210 Controller RECIPE REVIEW — Quickly see what is programmed for each product key 1. Press the SCAN key. 2. Select any product key previously programmed–LED will be lit above the key. 3. Press the DOWN arrow key to scroll through the list.
Page 7
Process Controllers Programming the (FASTRON.) VC-210 Controller Programming Mode for the Vision Controller is entered by pressing the “P” key for three (3) seconds. Multiple programming modes are available on the VC-210 as follows: Access Passcode Level 1724 Employee NOTES: •...
Page 8
• Turn off the fryer power. • With a flat screwdriver, remove the two screws that secure the bezel of the VC-210 in place. Remove the bezel. • Remove the existing menu strip(s) by lifting the tab and pulling the menu strip out from the right side of the controller.
Process Controllers RECIPE PROGRAMMING (1724) KEY PRESS DISPLAY ACTION • To enter programming mode, Enter Program mode press and hold the "P" key for 3 seconds. • Scroll down to “Programming.” • Press the “P” key to lock in entry. •...
Page 10
Process Controllers • Press the UP or DOWN arrow PRODUCT NAME Choose a Product Name keys to scroll through product names, OR start spelling the desired product name by using the top row of lettered product keys. • Press the “P” key to lock in selection.
Page 11
Process Controllers • Press the LEFT or RIGHT arrow STAGE 1 PRESSURE Set Pressure Solenoid Position (OPEN, CLOSED) keys to select whether the pressure solenoid should be opened or closed. This message will appear only if the appliance is a pressure fryer.
Page 12
Process Controllers • Press the LEFT or RIGHT arrow ALARM 1 TONE Setting Alarm 1 Tone SHORT, MEDIUM, keys to select Alarm Tone. LONG, DOUBLE, • Press the “P” key to advance to LONG/SHORT, NONE next stage or parameter. If applicable, repeat Steps 10-13 for additional Action Alarms. A total of three (3) Action Alarms can be programmed.
Page 16
Process Controllers PATENTS The products manufactured by FAST are protected under one or more of the following U.S. Patents: 4,782,445 4,812,625 4,812,963 4,864,498 4,911,068 4,920,948 5,043,860 5,171,974 5,331,575 5,539,671 5,711,606 5,723,846 5,726,424 5,875,430 6,142,666 6,339,930 6,401,467 6,505,546 6,581,391 7,015,433 Plus foreign patents and patents pending. Plus licensed patent 5,973,297 Specifications subject to change without notice.