FASTRON. VISION VC-220 Operating Manual page 7

Product Programming
Stage(s)
NOTE: Up to 11 Stages can be
programmed. If a time is pro-
grammed, control will go to next
step. If no time is programmed,
programming of the next prod-
uct key can begin.
Follow these steps to Program
a New Word.
Follow these steps to Program
an item from the Library.
Heat On &
Hold Mode
Lamps
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
(FASTRON.) VC-220
Set Stage Time
using the
numbered keys.
Press PROG
to spell out a
word.
Press PROG to
choose from
the Library.
Set Heat On Time
NOTE: If a time is
using the
programmed, con-
numbered keys.
trol will go to next
step. If no time is
programmed, skip
the next step.
Use the Up/Down To confirm
arrows to toggle
your choice,
choices. press ENTER.
www.fastinc.com
To confirm Use the Up/Down
your entry, arrows to toggle
press ENTER. choices.
Use the Up/Down Press PROG
arrows to scroll to select the
through the letter and
letters. advance.
Use the Up/Down To confirm
arrows to scroll your choice,
through the press ENTER.
Library.
Use the Up/Down To confirm
arrows to toggle your choice,
choices. press ENTER.
Use the Up/Down To confirm
arrows to toggle your choice,
choices. press ENTER.
1-800-243-9271
229-51300 E
To confirm
your choice,
press PROG.
When word
is complete,
press ENTER
to confirm.
7
© 2005-2010 FAST